home *** CD-ROM | disk | FTP | other *** search
- CENTurbo II Rev B
-
- Breaking the speed limit is now allowed.
-
- The first Falcon accelerator board at a full 50 MHz! *
-
- This card offers everything the Falcon is lacking!
-
- The CENTurbo II :
-
- - a new CPU 68030 32-Bit at a permanent 50 MHz!
- - a SIMM 32-Bit standard socket offers 32-Bit EDO Fast-RAM
- (16, 32, 64 ou 128 MB) accessed 7 times faster than on original
- 16 MHz ST-Ram. Thanks to the 5.2.2.2 BURST accesses of
- the 030 (32 MB/s) at 50 MHz.
- - a socket for a 32-Bit COPROCESSOR (68882-33) at 50 MHz.
- - the DSP of the Falcon is clocked at 50 MHz.
- - the BUS of the Falcon is clocked at 50 MHz (the CPU
- accesses at 50 MHz!).
- - ATA-4 IDE mangament (speed rate up to 9.7 MB/s with a Quantum
- Fireball eclipse !).
- - on board 64 KB FLASH Eprom containing a new SETUP
- and the BOOT of the FALCON (the CECILE driver by example).
- - a hardware switch allows you to come back to the 100% Falcon
- original mode.
- - Wonderfully designed, the CENTurbo II fits in the original Falcon case.
- The card is inserted in the bus slot, and only needs 16 wires to solder.
- - No wires soldered on the CT2. Ribbon cable connection between the
- CENTurbo II and the motherboard allows easy updates without solders !
- - No FLOPPY problems.
- - No SCSI problems !
- - No AUDIO problems (like clics or crackles !).
- - TURBO mode usable on VGA, TV, RGB and MONO (SM) monitors.
-
-
- The CT2 is supplied with DOLMEN FALCON, CENTscreen 3, CENTvidel 3
- CENTview softwares and CECILE, the IDE/SCSI Hard Disk driver.
-
- CENTscreen 3 is both a mouse accelerator, a screen energy manager
- (ENERGYSTAR compliant) and an enhanced resolution manager plus a
- virtual mode available in 3 options: 'center', 'proportional' and
- 'border'. Some examples of possible enhanced resolutions:
-
- 896*672* 2/16/256 at 66 Hz
- 1024*768*16/16/256 at 99 Hz Interlace
- 640*480*TC at 66 Hz
- 800*600*TC at 90 Hz Interlace
-
-
- Users and developers HOTLINE : +33 344 746 330
- From 9:00 pm to 11:00 pm
- Tuesday to Saturday (included).
-
-
- CENTurbo is a trademark of CENTEK.
-
- * AfterBurner is clocked at 32 MHz, CENTurbo 1 & Nemesis are
- clocked at 25 MHz. HADES 040 is clocked at 32 MHz, HADES 060
- is clocked at 60 MHz (bus at 30 MHz).
-